Maestro Invader Distortion Effect Pedal


1 in stock

SKU: Maestro-Invader-Distortion-Effects-Pedal-1-1 Category: Tag:

Maestro Invader Distortion Effect Pedal

The Maestro Invader Distortion is a high-gain, all-analog modern distortion pedal with a heavy, aggressive, dominant sonic character and loads of rich harmonics. With the Maestro Invader Distortion, users can generate a wide range of distorted sounds. The 3-knob control layout gives users intuitive control over Gain (distortion amount), Tone, and output Level, with more than enough volume on tap to easily exceed unity gain when you want to. Users can also engage a built-in noise gate with the top panel toggle switch. An internal trim pot mounted on the circuit board inside the pedal allows the user to adjust the level of the noise gate’s Threshold. The true bypass footswitch triggers the LED lights in the bugles in the Maestro logo when it’s on, so you’ll always know when the effect is active.

All proceeds from the purchase of this effect pedal will be donated to the Music Has Healing Power foundation, to be used for the Shriners Hospitals for Children music therapy program and music rooms. It will help provide children and their families in need and who are going through medical challenges with the healing gift of music, musical instruments, compassion, love and hope.
This effect is brand new. The Invader Distortion is also excellent with keyboards, percussion, bass, orchestral instruments, sound design and more.

Please don’t hesitate to get in touch with any questions.

Free Shipping!


Maestro Invader Distortion Effect Pedal Specifications

Controls: Gain, Tone, Level; internal Noise Gate Threshold trim pot
Switches: True Bypass footswitch, Gate On/Gate Off toggle switch
LED Indicators: Red, yellow, and blue bugles in the Maestro logo illuminate when the pedal is active
Signal Processing: All-Analog
Power Requirements: 9V battery or regulated 9-12*VDC power supply (5.5 x 2.1mm plug, wired center-negative) *Running the pedal at 12V provides increased headroom
Current Draw: 35 mA
Power On Switch: Incorporated into the input jack. Unplug the input when not in use to prevent battery drain. Remove the battery when the pedal is going to be stored for long periods to prevent leakage and damage.
Input Impedance: 100K ohms
Output Impedance: 100 ohms
Switching: True Bypass
Dimensions (D x W x H): 5.04” x 3.45” x 2.5”, including feet, knobs, jacks, etc.
Weight (Including Battery): 1.1 lb. / 498.95 gm.

Additional information


Sport Grey


, , , ,